Enum ceres_launchpad::pallet::Error
source · pub enum Error<T> {
Show 42 variants
ILOAlreadyExists,
ParameterCantBeZero,
InvalidSoftCap,
InvalidMinimumContribution,
InvalidMaximumContribution,
InvalidLiquidityPercent,
InvalidLockupDays,
InvalidStartTimestamp,
InvalidEndTimestamp,
InvalidPrice,
InvalidNumberOfTokensForLiquidity,
InvalidNumberOfTokensForILO,
InvalidFirstReleasePercent,
InvalidVestingPercent,
InvalidVestingPeriod,
NotEnoughCeres,
NotEnoughTokens,
ILONotStarted,
ILOIsFinished,
CantContributeInILO,
HardCapIsHit,
NotEnoughTokensToBuy,
ContributionIsLowerThenMin,
ContributionIsBiggerThenMax,
NotEnoughFunds,
ILODoesNotExist,
ILOIsNotFinished,
PoolDoesNotExist,
Unauthorized,
CantClaimLPTokens,
FundsAlreadyClaimed,
NothingToClaim,
ILOIsFailed,
ILOIsSucceeded,
CantCreateILOForListedToken,
AccountIsNotWhitelisted,
InvalidTeamFirstReleasePercent,
InvalidTeamVestingPercent,
InvalidTeamVestingPeriod,
NotEnoughTeamTokensToLock,
InvalidFeePercent,
BaseAssetNotSupported,
// some variants omitted
}Expand description
Custom dispatch errors of this pallet.
Variants§
ILOAlreadyExists
ILO for token already exists
ParameterCantBeZero
Parameter can’t be zero
InvalidSoftCap
Soft cap should be minimum 50% of hard cap
InvalidMinimumContribution
Minimum contribution must be equal or greater than 0.01 base asset tokens
InvalidMaximumContribution
Maximum contribution must be greater than minimum contribution
InvalidLiquidityPercent
Minimum 51% of raised funds must go to liquidity
InvalidLockupDays
Lockup days must be minimum 30
InvalidStartTimestamp
Start timestamp be in future
InvalidEndTimestamp
End timestamp must be greater than start timestamp
InvalidPrice
Listing price must be greater than ILO price
InvalidNumberOfTokensForLiquidity
Invalid number of tokens for liquidity
InvalidNumberOfTokensForILO
Invalid number of tokens for ILO
InvalidFirstReleasePercent
First release percent can’t be zero
InvalidVestingPercent
Invalid vesting percent
InvalidVestingPeriod
Vesting period can’t be zero
NotEnoughCeres
Not enough CERES
NotEnoughTokens
Not enough ILO tokens
ILONotStarted
ILO not started
ILOIsFinished
ILO is finished,
CantContributeInILO
Can’t contribute in ILO
HardCapIsHit
Hard cap is hit
NotEnoughTokensToBuy
Not enough tokens to buy
ContributionIsLowerThenMin
Contribution is lower than min
ContributionIsBiggerThenMax
Contribution is bigger than max
NotEnoughFunds
Not enough funds
ILODoesNotExist
ILO for token does not exist
ILOIsNotFinished
ILO is not finished
PoolDoesNotExist
Pool does not exist
Unauthorized
CantClaimLPTokens
Can’t claim LP tokens
FundsAlreadyClaimed
Funds already claimed
NothingToClaim
Nothing to claim
ILOIsFailed
ILO is failed
ILOIsSucceeded
ILO is succeeded
CantCreateILOForListedToken
Can’t create ILO for listed token
AccountIsNotWhitelisted
Account is not whitelisted
InvalidTeamFirstReleasePercent
Team first release percent can’t be zero
InvalidTeamVestingPercent
Team invalid vesting percent
InvalidTeamVestingPeriod
Team vesting period can’t be zero
NotEnoughTeamTokensToLock
Not enough team tokens to lock
InvalidFeePercent
Invalid fee percent on raised funds
BaseAssetNotSupported
Asset in which funds are being raised is not supported
Trait Implementations§
source§impl<T> Decode for Error<T>
impl<T> Decode for Error<T>
source§fn decode<__CodecInputEdqy: Input>(
__codec_input_edqy: &mut __CodecInputEdqy
) -> Result<Self, Error>
fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy ) -> Result<Self, Error>
Attempt to deserialise the value from input.
§fn decode_into<I>(
input: &mut I,
dst: &mut MaybeUninit<Self>
) -> Result<DecodeFinished, Error>where
I: Input,
fn decode_into<I>( input: &mut I, dst: &mut MaybeUninit<Self> ) -> Result<DecodeFinished, Error>where I: Input,
Attempt to deserialize the value from input into a pre-allocated piece of memory. Read more
§fn skip<I>(input: &mut I) -> Result<(), Error>where
I: Input,
fn skip<I>(input: &mut I) -> Result<(), Error>where I: Input,
Attempt to skip the encoded value from input. Read more
§fn encoded_fixed_size() -> Option<usize>
fn encoded_fixed_size() -> Option<usize>
Returns the fixed encoded size of the type. Read more
source§impl<T> Encode for Error<T>
impl<T> Encode for Error<T>
source§fn size_hint(&self) -> usize
fn size_hint(&self) -> usize
If possible give a hint of expected size of the encoding. Read more
source§fn encode_to<__CodecOutputEdqy: Output + ?Sized>(
&self,
__codec_dest_edqy: &mut __CodecOutputEdqy
)
fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy )
Convert self to a slice and append it to the destination.
§fn using_encoded<R, F>(&self, f: F) -> Rwhere
F: FnOnce(&[u8]) -> R,
fn using_encoded<R, F>(&self, f: F) -> Rwhere F: FnOnce(&[u8]) -> R,
Convert self to a slice and then invoke the given closure with it.
§fn encoded_size(&self) -> usize
fn encoded_size(&self) -> usize
Calculates the encoded size. Read more
source§impl<T> PalletError for Error<T>
impl<T> PalletError for Error<T>
source§const MAX_ENCODED_SIZE: usize = 1usize
const MAX_ENCODED_SIZE: usize = 1usize
The maximum encoded size for the implementing type. Read more
source§impl<T> TypeInfo for Error<T>where
PhantomData<T>: TypeInfo + 'static,
T: 'static,
impl<T> TypeInfo for Error<T>where PhantomData<T>: TypeInfo + 'static, T: 'static,
impl<T> EncodeLike<Error<T>> for Error<T>
Auto Trait Implementations§
impl<T> RefUnwindSafe for Error<T>where T: RefUnwindSafe,
impl<T> Send for Error<T>where T: Send,
impl<T> Sync for Error<T>where T: Sync,
impl<T> Unpin for Error<T>where T: Unpin,
impl<T> UnwindSafe for Error<T>where T: UnwindSafe,
Blanket Implementations§
§impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
§fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,
§fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> DecodeAll for Twhere
T: Decode,
impl<T> DecodeAll for Twhere T: Decode,
§fn decode_all(input: &mut &[u8]) -> Result<T, Error>
fn decode_all(input: &mut &[u8]) -> Result<T, Error>
Decode
Self and consume all of the given input data. Read more§impl<T> DecodeLimit for Twhere
T: Decode,
impl<T> DecodeLimit for Twhere T: Decode,
§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere T: Any,
§fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>
Convert
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert
Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait.§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,
Causes
self to use its Binary implementation when Debug-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,
Causes
self to use its Display implementation when
Debug-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,
Causes
self to use its LowerExp implementation when
Debug-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,
Causes
self to use its LowerHex implementation when
Debug-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,
Causes
self to use its Octal implementation when Debug-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,
Causes
self to use its Pointer implementation when
Debug-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,
Causes
self to use its UpperExp implementation when
Debug-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,
Causes
self to use its UpperHex implementation when
Debug-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,
Formats each item in a sequence. Read more
§impl<T> Hashable for Twhere
T: Codec,
impl<T> Hashable for Twhere T: Codec,
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
§impl<T> IsType<T> for T
impl<T> IsType<T> for T
§impl<T> KeyedVec for Twhere
T: Codec,
impl<T> KeyedVec for Twhere T: Codec,
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,
Pipes by value. This is generally the method you want to use. Read more
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,
Borrows
self and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,
Mutably borrows
self and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,
Borrows
self, then passes self.as_ref() into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,
Mutably borrows
self, then passes self.as_mut() into the pipe
function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<A> PureOrWrapped<A> for A
impl<A> PureOrWrapped<A> for A
§fn is_wrapped_regular(&self) -> bool
fn is_wrapped_regular(&self) -> bool
The entity is a wrapped
Regular.§fn is_wrapped(&self) -> bool
fn is_wrapped(&self) -> bool
The entity is wrapped.
§impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
§fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,
§fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of
T. Read more§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
Immutable access to the
Borrow<B> of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
Mutable access to the
BorrowMut<B> of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
Immutable access to the
AsRef<R> view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
Mutable access to the
AsMut<R> view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,
Immutable access to the
Deref::Target of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,
Mutable access to the
Deref::Target of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls
.tap() only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls
.tap_mut() only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
Calls
.tap_borrow() only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
Calls
.tap_borrow_mut() only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
Calls
.tap_ref() only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
Calls
.tap_ref_mut() only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,
§fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to
unchecked_from.§impl<T, S> UniqueSaturatedInto<T> for Swhere
T: Bounded,
S: TryInto<T>,
impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,
§fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of
T.§impl<T> WithPostDispatchInfo for Twhere
T: Into<DispatchError>,
impl<T> WithPostDispatchInfo for Twhere T: Into<DispatchError>,
§fn with_weight(
self,
actual_weight: Weight
) -> DispatchErrorWithPostInfo<PostDispatchInfo>
fn with_weight( self, actual_weight: Weight ) -> DispatchErrorWithPostInfo<PostDispatchInfo>
Call this on your modules custom errors type in order to return a custom weight on error. Read more