Enum liquidity_proxy::pallet::Call

pub enum Call<T: Config> {
    swap {
        dex_id: T::DEXId,
        input_asset_id: T::AssetId,
        output_asset_id: T::AssetId,
        swap_amount: SwapAmount<Balance>,
        selected_source_types: Vec<LiquiditySourceType>,
        filter_mode: FilterMode,
    },
    swap_transfer {
        receiver: T::AccountId,
        dex_id: T::DEXId,
        input_asset_id: T::AssetId,
        output_asset_id: T::AssetId,
        swap_amount: SwapAmount<Balance>,
        selected_source_types: Vec<LiquiditySourceType>,
        filter_mode: FilterMode,
    },
    swap_transfer_batch {
        swap_batches: Vec<SwapBatchInfo<T::AssetId, T::DEXId, T::AccountId>>,
        input_asset_id: T::AssetId,
        max_input_amount: Balance,
        selected_source_types: Vec<LiquiditySourceType>,
        filter_mode: FilterMode,
    },
    enable_liquidity_source {
        liquidity_source: LiquiditySourceType,
    },
    disable_liquidity_source {
        liquidity_source: LiquiditySourceType,
    },
    set_adar_commission_ratio {
        commission_ratio: Balance,
    },
    // some variants omitted
}

Contains one variant per dispatchable that can be called by an extrinsic.

Variants

swap

Fields

dex_id: T::DEXId

input_asset_id: T::AssetId

output_asset_id: T::AssetId

swap_amount: SwapAmount<Balance>

selected_source_types: Vec<LiquiditySourceType>

filter_mode: FilterMode

Perform swap of tokens (input/output defined via SwapAmount direction).

• origin: the account on whose behalf the transaction is being executed,
• dex_id: DEX ID for which liquidity sources aggregation is being done,
• input_asset_id: ID of the asset being sold,
• output_asset_id: ID of the asset being bought,
• swap_amount: the exact amount to be sold (either in input_asset_id or output_asset_id units with corresponding slippage tolerance absolute bound),
• selected_source_types: list of selected LiquiditySource types, selection effect is determined by filter_mode,
• filter_mode: indicate either to allow or forbid selected types only, or disable filtering.

swap_transfer

Fields

receiver: T::AccountId

dex_id: T::DEXId

input_asset_id: T::AssetId

output_asset_id: T::AssetId

swap_amount: SwapAmount<Balance>

selected_source_types: Vec<LiquiditySourceType>

filter_mode: FilterMode

Perform swap of tokens (input/output defined via SwapAmount direction).

• origin: the account on whose behalf the transaction is being executed,
• receiver: the account that receives the output,
• dex_id: DEX ID for which liquidity sources aggregation is being done,
• input_asset_id: ID of the asset being sold,
• output_asset_id: ID of the asset being bought,
• swap_amount: the exact amount to be sold (either in input_asset_id or output_asset_id units with corresponding slippage tolerance absolute bound),
• selected_source_types: list of selected LiquiditySource types, selection effect is determined by filter_mode,
• filter_mode: indicate either to allow or forbid selected types only, or disable filtering.

swap_transfer_batch

Fields

swap_batches: Vec<SwapBatchInfo<T::AssetId, T::DEXId, T::AccountId>>

input_asset_id: T::AssetId

max_input_amount: Balance

selected_source_types: Vec<LiquiditySourceType>

filter_mode: FilterMode

Dispatches multiple swap & transfer operations. swap_batches contains vector of SwapBatchInfo structs, where each batch specifies which asset ID and DEX ID should be used for swapping, receiver accounts and their desired outcome amount in asset, specified for the current batch.

• origin: the account on whose behalf the transaction is being executed,
• swap_batches: the vector containing the SwapBatchInfo structs,
• input_asset_id: ID of the asset being sold,
• max_input_amount: the maximum amount to be sold in input_asset_id,
• selected_source_types: list of selected LiquiditySource types, selection effect is determined by filter_mode,
• filter_mode: indicate either to allow or forbid selected types only, or disable filtering.

enable_liquidity_source

Fields

liquidity_source: LiquiditySourceType

Enables XST or TBC liquidity source.

• liquidity_source: the liquidity source to be enabled.

disable_liquidity_source

Fields

liquidity_source: LiquiditySourceType

Disables XST or TBC liquidity source. The liquidity source becomes unavailable for swap.

• liquidity_source: the liquidity source to be disabled.

set_adar_commission_ratio

Fields

commission_ratio: Balance

Implementations

impl<T: Config> Call<T>

pub fn new_call_variant_swap( dex_id: T::DEXId, input_asset_id: T::AssetId, output_asset_id: T::AssetId, swap_amount: SwapAmount<Balance>, selected_source_types: Vec<LiquiditySourceType>, filter_mode: FilterMode ) -> Self

Create a call with the variant swap.

pub fn new_call_variant_swap_transfer( receiver: T::AccountId, dex_id: T::DEXId, input_asset_id: T::AssetId, output_asset_id: T::AssetId, swap_amount: SwapAmount<Balance>, selected_source_types: Vec<LiquiditySourceType>, filter_mode: FilterMode ) -> Self

Create a call with the variant swap_transfer.

pub fn new_call_variant_swap_transfer_batch( swap_batches: Vec<SwapBatchInfo<T::AssetId, T::DEXId, T::AccountId>>, input_asset_id: T::AssetId, max_input_amount: Balance, selected_source_types: Vec<LiquiditySourceType>, filter_mode: FilterMode ) -> Self

Create a call with the variant swap_transfer_batch.

pub fn new_call_variant_enable_liquidity_source( liquidity_source: LiquiditySourceType ) -> Self

Create a call with the variant enable_liquidity_source.

pub fn new_call_variant_disable_liquidity_source( liquidity_source: LiquiditySourceType ) -> Self

Create a call with the variant disable_liquidity_source.

pub fn new_call_variant_set_adar_commission_ratio( commission_ratio: Balance ) -> Self

Create a call with the variant set_adar_commission_ratio.

Trait Implementations

impl<T: Config> Clone for Call<T>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Config> Debug for Call<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T: Config> Decode for Call<T>

fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy ) -> Result<Self, Error>

Attempt to deserialise the value from input.

fn decode_into<I>( input: &mut I, dst: &mut MaybeUninit<Self> ) -> Result<DecodeFinished, Error>where I: Input,

Attempt to deserialize the value from input into a pre-allocated piece of memory.

fn skip<I>(input: &mut I) -> Result<(), Error>where I: Input,

Attempt to skip the encoded value from input.

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type.

impl<T: Config> Encode for Call<T>

fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding.

fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy )

Convert self to a slice and append it to the destination.

fn encode(&self) -> Vec<u8, Global>

Convert self to an owned vector.

fn using_encoded<R, F>(&self, f: F) -> Rwhere F: FnOnce(&[u8]) -> R,

Convert self to a slice and then invoke the given closure with it.

fn encoded_size(&self) -> usize

Calculates the encoded size.

impl<T: Config> GetCallName for Call<T>

fn get_call_name(&self) -> &'static str

Return the function name of the Call.

fn get_call_names() -> &'static [&'static str]

Return all function names.

impl<T: Config> GetDispatchInfo for Call<T>

fn get_dispatch_info(&self) -> DispatchInfo

👎Deprecated: Trait has moved to frame_support::dispatch

impl<T: Config> GetDispatchInfo for Call<T>

fn get_dispatch_info(&self) -> DispatchInfo

Return a DispatchInfo, containing relevant information of this dispatch.

impl<T: Config> PartialEq<Call<T>> for Call<T>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> TypeInfo for Call<T>where PhantomData<(T,)>: TypeInfo + 'static, T::DEXId: TypeInfo + 'static, T::AssetId: TypeInfo + 'static, T::AccountId: TypeInfo + 'static, Vec<SwapBatchInfo<T::AssetId, T::DEXId, T::AccountId>>: TypeInfo + 'static, T: Config + 'static,

type Identity = Call<T>

The type identifying for which type info is provided.

fn type_info() -> Type

Returns the static type identifier for Self.

impl<T: Config> UnfilteredDispatchable for Call<T>

type RuntimeOrigin = <T as Config>::RuntimeOrigin

The origin type of the runtime, (i.e. frame_system::Config::RuntimeOrigin).

fn dispatch_bypass_filter( self, origin: Self::RuntimeOrigin ) -> DispatchResultWithPostInfo

Dispatch this call but do not check the filter in origin.

impl<T: Config> EncodeLike<Call<T>> for Call<T>

impl<T: Config> Eq for Call<T>