pub struct TransactionApi;

Implementations§

source§

impl TransactionApi

source

pub fn add_registrar( &self, account: AccountId32 ) -> StaticTxPayload<AddRegistrar>

Add a registrar to the system.

The dispatch origin for this call must be T::RegistrarOrigin.

  • account: the account of the registrar.

Emits RegistrarAdded if successful.

  • O(R) where R registrar-count (governance-bounded and code-bounded).
  • One storage mutation (codec O(R)).
  • One event.
source

pub fn set_identity(&self, info: IdentityInfo) -> StaticTxPayload<SetIdentity>

Set an account’s identity information and reserve the appropriate deposit.

If the account already has identity information, the deposit is taken as part payment for the new deposit.

The dispatch origin for this call must be Signed.

  • info: The identity information.

Emits IdentitySet if successful.

  • O(X + X' + R)
    • where X additional-field-count (deposit-bounded and code-bounded)
    • where R judgements-count (registrar-count-bounded)
  • One balance reserve operation.
  • One storage mutation (codec-read O(X' + R), codec-write O(X + R)).
  • One event.
source

pub fn set_subs( &self, subs: Vec<(AccountId32, Data)> ) -> StaticTxPayload<SetSubs>

Set the sub-accounts of the sender.

Payment: Any aggregate balance reserved by previous set_subs calls will be returned and an amount SubAccountDeposit will be reserved for each item in subs.

The dispatch origin for this call must be Signed and the sender must have a registered identity.

  • subs: The identity’s (new) sub-accounts.
  • O(P + S)
    • where P old-subs-count (hard- and deposit-bounded).
    • where S subs-count (hard- and deposit-bounded).
  • At most one balance operations.
  • DB:
    • P + S storage mutations (codec complexity O(1))
    • One storage read (codec complexity O(P)).
    • One storage write (codec complexity O(S)).
    • One storage-exists (IdentityOf::contains_key).
source

pub fn clear_identity(&self) -> StaticTxPayload<ClearIdentity>

Clear an account’s identity info and all sub-accounts and return all deposits.

Payment: All reserved balances on the account are returned.

The dispatch origin for this call must be Signed and the sender must have a registered identity.

Emits IdentityCleared if successful.

  • O(R + S + X)
    • where R registrar-count (governance-bounded).
    • where S subs-count (hard- and deposit-bounded).
    • where X additional-field-count (deposit-bounded and code-bounded).
  • One balance-unreserve operation.
  • 2 storage reads and S + 2 storage deletions.
  • One event.
source

pub fn request_judgement( &self, reg_index: u32, max_fee: u128 ) -> StaticTxPayload<RequestJudgement>

Request a judgement from a registrar.

Payment: At most max_fee will be reserved for payment to the registrar if judgement given.

The dispatch origin for this call must be Signed and the sender must have a registered identity.

  • reg_index: The index of the registrar whose judgement is requested.
  • max_fee: The maximum fee that may be paid. This should just be auto-populated as:
Self::registrars().get(reg_index).unwrap().fee

Emits JudgementRequested if successful.

  • O(R + X).
  • One balance-reserve operation.
  • Storage: 1 read O(R), 1 mutate O(X + R).
  • One event.
source

pub fn cancel_request(&self, reg_index: u32) -> StaticTxPayload<CancelRequest>

Cancel a previous request.

Payment: A previously reserved deposit is returned on success.

The dispatch origin for this call must be Signed and the sender must have a registered identity.

  • reg_index: The index of the registrar whose judgement is no longer requested.

Emits JudgementUnrequested if successful.

  • O(R + X).
  • One balance-reserve operation.
  • One storage mutation O(R + X).
  • One event
source

pub fn set_fee(&self, index: u32, fee: u128) -> StaticTxPayload<SetFee>

Set the fee required for a judgement to be requested from a registrar.

The dispatch origin for this call must be Signed and the sender must be the account of the registrar whose index is index.

  • index: the index of the registrar whose fee is to be set.
  • fee: the new fee.
  • O(R).
  • One storage mutation O(R).
  • Benchmark: 7.315 + R * 0.329 µs (min squares analysis)
source

pub fn set_account_id( &self, index: u32, new: AccountId32 ) -> StaticTxPayload<SetAccountId>

Change the account associated with a registrar.

The dispatch origin for this call must be Signed and the sender must be the account of the registrar whose index is index.

  • index: the index of the registrar whose fee is to be set.
  • new: the new account ID.
  • O(R).
  • One storage mutation O(R).
  • Benchmark: 8.823 + R * 0.32 µs (min squares analysis)
source

pub fn set_fields( &self, index: u32, fields: BitFlags<IdentityField> ) -> StaticTxPayload<SetFields>

Set the field information for a registrar.

The dispatch origin for this call must be Signed and the sender must be the account of the registrar whose index is index.

  • index: the index of the registrar whose fee is to be set.
  • fields: the fields that the registrar concerns themselves with.
  • O(R).
  • One storage mutation O(R).
  • Benchmark: 7.464 + R * 0.325 µs (min squares analysis)
source

pub fn provide_judgement( &self, reg_index: u32, target: AccountId32, judgement: Judgement<u128>, identity: H256 ) -> StaticTxPayload<ProvideJudgement>

Provide a judgement for an account’s identity.

The dispatch origin for this call must be Signed and the sender must be the account of the registrar whose index is reg_index.

  • reg_index: the index of the registrar whose judgement is being made.
  • target: the account whose identity the judgement is upon. This must be an account with a registered identity.
  • judgement: the judgement of the registrar of index reg_index about target.
  • identity: The hash of the [IdentityInfo] for that the judgement is provided.

Emits JudgementGiven if successful.

  • O(R + X).
  • One balance-transfer operation.
  • Up to one account-lookup operation.
  • Storage: 1 read O(R), 1 mutate O(R + X).
  • One event.
source

pub fn kill_identity( &self, target: AccountId32 ) -> StaticTxPayload<KillIdentity>

Remove an account’s identity and sub-account information and slash the deposits.

Payment: Reserved balances from set_subs and set_identity are slashed and handled by Slash. Verification request deposits are not returned; they should be cancelled manually using cancel_request.

The dispatch origin for this call must match T::ForceOrigin.

  • target: the account whose identity the judgement is upon. This must be an account with a registered identity.

Emits IdentityKilled if successful.

  • O(R + S + X).
  • One balance-reserve operation.
  • S + 2 storage mutations.
  • One event.
source

pub fn add_sub(&self, sub: AccountId32, data: Data) -> StaticTxPayload<AddSub>

Add the given account to the sender’s subs.

Payment: Balance reserved by a previous set_subs call for one sub will be repatriated to the sender.

The dispatch origin for this call must be Signed and the sender must have a registered sub identity of sub.

source

pub fn rename_sub( &self, sub: AccountId32, data: Data ) -> StaticTxPayload<RenameSub>

Alter the associated name of the given sub-account.

The dispatch origin for this call must be Signed and the sender must have a registered sub identity of sub.

source

pub fn remove_sub(&self, sub: AccountId32) -> StaticTxPayload<RemoveSub>

Remove the given account from the sender’s subs.

Payment: Balance reserved by a previous set_subs call for one sub will be repatriated to the sender.

The dispatch origin for this call must be Signed and the sender must have a registered sub identity of sub.

source

pub fn quit_sub(&self) -> StaticTxPayload<QuitSub>

Remove the sender as a sub-account.

Payment: Balance reserved by a previous set_subs call for one sub will be repatriated to the sender (not the original depositor).

The dispatch origin for this call must be Signed and the sender must have a registered super-identity.

NOTE: This should not normally be used, but is provided in the case that the non- controller of an account is maliciously registered as a sub-account.

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CheckedConversion for T

§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> Downcast for Twhere T: Any,

§

fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for Twhere T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send + 'static>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> IsType<T> for T

§

fn from_ref(t: &T) -> &T

Cast reference.
§

fn into_ref(&self) -> &T

Cast reference.
§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> Pipe for Twhere T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<A> PureOrWrapped<A> for A

source§

fn is_pure(&self) -> bool

Not any data is wrapped.
source§

fn is_wrapped_regular(&self) -> bool

The entity is a wrapped Regular.
source§

fn is_wrapped(&self) -> bool

The entity is wrapped.
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
§

impl<T> SaturatedConversion for T

§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

§

impl<T> MaybeSend for Twhere T: Send,